In recent years, with the continuous development of the transportation industry, the pipeline conveyor embodies more and more applications. However, in the process of pipeline conveyor operation, in the case of careless use of many failures occurred. In order to avoid reducing work efficiency and reduce the occurrence of safety accidents, the following points need to be concerned about the application of pipeline conveyor:

First, the line conveyor must have enough strength. Stop using low strength conveyor belt instead of high strength conveyor belt. The ultimate azimuth limiter is installed in the tensioning device of the pipeline conveyor. When the equipment hoist reaches its limit position, it must be ensured that the hoisting power is stopped and a signal to stop hoisting is given. As you descend to the limit position, be sure to actively intercept the power supply and signal to stop the descent. The most important point is that the braking equipment must be in a state where the braking effect can be obtained at any time.

(1) the line conveyor associated with the conveyor belt shall be kept clean and shall be kept clean during transportation and storage, and shall not be affected by direct sunlight or rain and snow, so as to avoid every other meter of heating equipment contact with substances such as acid, alkali, oil, organic solvents.

(2) the storage temperature of the pipeline conveyor should be kept between 18 ℃ and 40℃, and the relative humidity should be between 50% and 80%.

(3) in the storage process of the pipeline conveyor, the product shall be placed behind the roller, not folded, and the mobile conveyor belt shall be inverted.